Forge Motorsport Intake Kit for Hyundai i20N
Sports intake kit with foam or cotton filter and heat shield for Hyundai i20N cars.
| Category: | HYUNDAI |
|---|
Despite Forge Motorsport's extensive experience with Hyundai's N division sports models, the development of the intake for the i20N required extensive testing. The heat shield was designed using CAD software and is laser cut. This shield prevents heat from the engine from penetrating the air filter. It also helps direct fresh air to the filter itself. The black powder coating then gives the intake a subtle factory look.
Low temperature and a large amount of intake air have a great influence on performance, especially in a turbocharged engine. The Forge Motorsport intake supplies the area in front of the turbocharger with a large amount of cold air, which means a faster throttle response and, thanks to the lower air temperature, also higher performance.
Forge Mototrsport intakes are completely designed and manufactured in Great Britain.
For the Forge Motorsport intake, you can choose either a foam filter, which is made in cooperation with the British company Pipercross, or a cotton filter. Both filters can be impregnated with oil during cleaning, which is especially recommended in hot and dusty areas. The 1.6 Turbo engine used in the i20N models is not equipped with a MAF sensor, so impregnation has no effect on the life of such a sensor and does not affect the performance or life of the engine.
As can be seen in the attached graph, the increase in power and torque is noticeable across the entire rev range. Torque increased by 20 Nm at 2400 rpm and by 15 Nm from 3000 to 3800 rpm. Power increased by 7 hp at 3700 rpm and by 6 hp at 6400 rpm.
In some pictures you can also see the silicone hose with integrated turbo inlet (FMTIA11). This hose is available separately and supports not only power and torque, but also the sound of the car. Also, in the photos, the hose from the blow off valve is not connected. The test car used an atmospheric (open) blow off valve Forge Motorsport FMDV37.
Package contains:
- 1x aluminium coupler
- 1x aluminium heat shield with rubber edge
- 1x foam or cotton sports filter
- 1x M6 washer
- 1x M6x12 screw
Discussion
Be the first who will post an article to this item!
Naše společnost PerformanceParts je přímým dovozcem oblečení HYUNDAI MOTORSPORT pro ČR/SK.