RPM Performance
Product sorting
List of products
At RPM Performance, we can now offer lower torque mount bushes for the Hyundai I30N / I20N / Kona N / VN.
Our lower torque mount bushes replace the soft and spongy OEM rubber bushes in the lower engine torque mount found on all Hyundai I20N, I30N, Kona N and Veloster N vehicles.
This part offers increased engine stability under acceleration with virtually no increase in NVH. This mount significantly reduces wheel hop with a more direct power transfer to the road, and is suitable for standard and tuned vehicles.
Here at RPM Performance, we can successfully manufacture short shifter adapters for the Hyundai I20N. They are unlike other available short shifter adapters.
Currently, all available short shifters for the I20N are located at the end of the gearbox linkage. We have manufactured ours to replace the adapter at the gearbox end of the gear shift lever at the base of the OEM gear stick. Therefore, the throw is reduced by approximately 35% with virtually no increase in effort required to shift, and thus there is no increase in the 'notchiness' often associated with short shifters located at the end of the gearbox.
Manufactured from 6061 aluminium with UK-made stainless steel fixings!
35% Shorter Gear Throw
CNC Machined for a Perfect Fit
No "Notchiness"
Black Anodised for Corrosion Resistance
RPM Performance Hyundai I30N & I20N Upgraded Exhaust Spring
The Hyundai I30N and I20N exhaust system is equipped with a very weak exhaust spring, which weakens over time and causes the dreaded rattling sound. To solve this problem, Hyundai requires you to replace the entire rear box and does not sell this spring as an upgrade separately.
Our exhaust springs are made from premium material, and we have altered the spring stiffness so the spring does not weaken or crack due to heat.
Fits all Hyundai i20N, I30 N & I30 Fastback N & Veloster N
Suits standard OEM exhausts and our aftermarket exhaust system
Easy installation, remove the rear box and replace the spring
RPM Performance Hyundai I30N & I20N Upgraded Exhaust Spring
The Hyundai I30N and I20N exhaust system is equipped with a very weak exhaust spring, which weakens over time and causes the dreaded rattling sound. To solve this problem, Hyundai requires you to replace the entire rear box and does not sell this spring as an upgrade separately.
Our exhaust springs are made from premium material, and we have altered the spring stiffness so the spring does not weaken or crack due to heat.
Fits all Hyundai i20N, I30 N & I30 Fastback N & Veloster N
Suits standard OEM exhausts and our aftermarket exhaust system
Easy installation, remove the rear box and replace the spring
RPM Performance Hyundai I30N Dynamic Turn Indicators
Finally we can introduce our new smoked dynamic turn indicators
Check out the video below to see how the dynamic turn indicator works.
Legally tinted
Plug and Play installation
OEM equivalent
No error messages
ECE marking
Suitable for:
Hyundai i30
Hyundai i30NLine
Hyundai i30N hatchback
Hyundai i30N Fastback
Facelift Hyundai I30N
Included in the set:
1x left dynamic turn indicator, 1x right dynamic turn indicator, 1x lever tool
Installation at your own risk. We accept no liability for subsequent damage to the vehicle.
Here at RPM Performance, we successfully manufacture Short Shifter Adapters for the Hyundai I30N / VELOSTER N. They are unlike other available short shifter adapters.
Currently, all available short shifters for the I30N are located at the gearbox end of the shift linkage. We have manufactured ours to replace the adapter at the gearbox end of the gear shift lever at the base of the OEM gear stick. Therefore, the throw is reduced by 35% with virtually no increase in effort required to shift, meaning there is no increase in the “notchiness” often associated with short shifter adapters located at the gearbox end.
Manufactured from 6061 aluminium with UK-made stainless steel fixings!
35% Shorter Gear Throw
CNC Machined for a Perfect Fit
No "Notchiness"
Black Anodised for Corrosion Resistance
Hyundai I20N Wishbone Reinforcements
This is one of the most important suspension upgrades you can make to the Hyundai I20N to reduce wheel hop.
These reinforcements improve driver feedback from the steering wheel, making it feel more direct and solid. Under extreme load and hard acceleration, the standard wishbones flex. Therefore, fitting these reinforcements will reduce flex and deflection of the wishbones, which will improve 'wheel hop' and handling.
On the Hyundai I30N, this was one of our best-selling products. Hyundai has a similar design as standard, with reinforced wishbones on the Kona N!
These reinforcing plates are made from 304 stainless steel and come with the correct fixings for installation.
Fits all RHD and LHD Hyundai I20N
Improved handling and reduced 'wheel hop'
Stainless steel, supplied with the correct fixings
Easy installation
Precision measured, CAD-designed and laser-cut to guarantee a perfect fit
Hyundai I30N Wishbone Braces
This is one of the most important suspension upgrades you can do for the Hyundai I30N / Veloster N.
These reinforcements improve driver feedback from the steering wheel, making it feel more direct and solid. Under extreme load and hard acceleration, the standard wishbones flex. Therefore, fitting these braces will reduce flex and deflection from the lower ball joint, which will improve wheel hop and handling.
These reinforcing plates are made from 304 stainless steel and come with the correct fixings.
Suitable for all Right-Hand Drive and Left-Hand Drive Hyundai I30 N & Veloster N
Improved handling and reduced 'wheel hop'
Stainless steel, supplied with the correct fixings
Easy installation
Precision measured, CAD-designed and laser-cut to guarantee a perfect fit
At RPM Performance, we can now offer our Hyundai I20N / I30N / VN Gear Knob
Fits all 2018+ manual models Hyundai I20N/I30N/Veloster N/Elantra N. Our gear knobs are designed to replace the original gear knob.
Durable Black Anodized Coating
Laser etched logo
Made in the UK
Simple installation
RPM Performance Ford Focus ST MK4 19-20 GPF Exhaust Delete:
Here at RPM Performance, we successfully manufacture Ford Focus ST MK4 19-20 GPF Deletes. It's not like normal GPF Deletes on the market.
Made from 304 grade stainless steel, professionally TIG welded and hand-crafted in the United Kingdom!
What is a GPF?
Gasoline Particulate Filters (GPF) are an emissions after-treatment technology based on Diesel Particulate Filters (DPF), developed to control particulate emissions from Gasoline Direct Injection (GDI) engines.
It is also the most restrictive part of the exhaust system. Our GPF Delete increases gas flow for maximum output.
What will it sound like?
Turbocharged engines need to be able to breathe. By removing the stock GPF for the RPM PERFORMANCE GPF Delete you are effectively increasing flow, so you should notice a slight power increase and a significant sound increase, especially when on boost.
Comes with the correct adapter to install to the standard exhaust.
This brace from RPM Performance significantly reduces wheel hop and greatly improves handling. By connecting both inner wishbone bolts, the brace prevents the wishbone arms from being pulled together.
Adding the brace effectively strengthens the subframe. During sharp turns and acceleration, the transverse arms tend to bend at the mounting bolts. This lateral force is transferred to the subframe, and the brace helps prevent this bending.
Installation is simple: simply remove the two bolts and attach the brace to the subframe.
Importantly, this brace does not make driving your vehicle more difficult.
This brace from RPM Performance significantly reduces wheel hop and greatly improves handling. By connecting both inner wishbone bolts, the brace prevents the wishbone arms from being pulled together.
Adding the brace effectively strengthens the subframe. During sharp turns and acceleration, the transverse arms tend to bend at the mounting bolts. This lateral force is transferred to the subframe, and the brace helps prevent this bending.
Installation is simple: simply remove the two bolts and attach the brace to the subframe.
Importantly, this brace does not make driving your vehicle more difficult.
This brace from RPM Performance significantly reduces wheel hop and greatly improves handling. By connecting both inner wishbone bolts, the brace prevents the wishbone arms from being pulled together.
Adding the brace effectively strengthens the subframe. During sharp turns and acceleration, the transverse arms tend to bend at the mounting bolts. This lateral force is transferred to the subframe, and the brace helps prevent this bending.
Installation is simple: simply remove the two bolts and attach the brace to the subframe.
Importantly, this brace does not make driving your vehicle more difficult.
