HYUNDAI N, Page 14
Product sorting
List of products
Size: 7.5x18 ET53
Bolt Pattern: 5x114.3
Center Bore: 67.1
Weight: 9,5 kg
Size: 7.5x18 ET53
Bolt Pattern: 5x114.3
Center Bore: 67.1
Weight: 9,5 kg
Set of two spacers (1 axle)
15 mm per wheel
No screw cutting required
Material: Aluminium
Color: Silver
Size: 7.5x18 ET53
Bolt Pattern: 5x114.3
Center Bore: 67.1
Weight: 9,5 kg
Dimensions: 112.5mm x 51.6mm x 16.5mm
Compound A06:
- Operating temperature 200 to 800 °C
- Friction coefficient 0.30-0.35µ
- Designed for the rear axle of front-wheel drive vehicles
- Lower initial bite to prevent rear axle over-braking
- Same friction coefficient throughout the entire temperature range
PAGID Racing STREET+ Rear Brake Pads for:
Hyundai i30N (PD) 2.0 Turbo 2017+
Dimensions: 112.7 x 51.5 x 16.5 mm
*Illustrative photo
STREET+ Brake Pad Compound
- Sport Driving, Hill Climb Racing
- For Road Use
- Works from Low Temperatures
- Avg. Friction Coefficient 0.47
- Operating Temperature 20-600°C
For many vehicles, brake cooling is recommended even under moderate loads, including off the race track.
This not only improves braking performance, but can also significantly reduce wear on the friction surfaces.
We direct the airflow to the center of the brake disc to utilize the turbine effect, cooling the disc from the inside at a specific angle to prevent waste and maximize the efficient use of the available air volume.
Thanks to its lightweight construction combined with powder-coated aluminum, the component is both sufficiently strong and lightweight.
* Part intended for motorsport use, without road approval (e.g., ECE).
Rear brake disc DBA Street T3 for:
Hyundai i30N (PD) Performance Package
Diameter: 314 mm
Thickness: 20 mm
Quantity: 1 piece
5000 T3:
- Slotted, two-piece
- Normal and sporty driving, race days, motorsport
- XG-150 High Carbon Alloy
- Kangaroo Paw cooling and thermal marking for temperature control
*Illustrative photo
HYI303NCNC-FD2B-FSF1G
HARDRACE Camber Kit Reduces Tire Wear and Increases Tire Durability. Equipped with a top-quality bushing, it provides advanced stability and precise steering response, especially when driving at high speeds and cornering. One-Piece OE Design. Camber Adjustment. Provides Stability. Helps Reduce Chassis Roll and Flex. Enhances Steering Response. ED Process and Painting for Extended Control Arm Life
Front brake pads PAGID Racing STREET+ Compound for:
Hyundai i30N (PD) 2.0 Turbo 2017+
Dimension: 140.7 x 61.3 x 19.7 mm
*Illustrative photo
STREET+ Brake Pad Compound
- Sport Driving, Hill Climb Racing
- For Road Use
- Works from Low Temperatures
- Avg. Friction Coefficient 0.47
- Operating Temperature 20-600°C
Maxton Design front bumper lip spoilers for the Hyundai i30N. Spoiler surface finish: red gloss ABS plastic.
Designed for: Hyundai I30 N Fastback 2017 -2020 | Hyundai I30 N Hatchback 2017-2020
