PDEN Hatchback (2017-2020), Page 20
Product sorting
List of products
Whiteline sway bar kit:
- Front: 22mm (2 adjustment options)
- Rear: 16mm (2 adjustment options)
- Including rods and sway bar mounts
Carbon fibre front fenders for i30N
Carbon wings for i30N
Original driveshaft for i30N Hyundai 2017-2021 (pre-Facelift)
Gearbox: manual
Side: Right
!!! Always provide VIN with your order !!!
- Photo illustrative -
Dimensions: 8x19 ET55
Bolt Pattern: 5x114.3
Center Bore: 67.1
Weight: 9.7 kg
Can be cleaned and reused
30 to 40% higher airflow
Significant change in intake noise
High durability
Parts certificate included (for use on public roads, the parts certificate must be registered in the vehicle documents)
Incl. very detailed installation instructions
No warranty restrictions, as the N logo intake kit is an original Hyundai accessory (applies only to Germany. In other countries, please contact Hyundai).
Caution: Registration is possible in combination with ECE-approved parts. However, as such registration is at the inspector's discretion, please clarify this with the inspector beforehand.
Caution!: Cannot be used in conjunction with auxiliary heaters.
Motorsport aerodynamics for your Hyundai I30n!
With our SPEED diffuser, you will not only visually stand out from the crowd, but also bring technology from professional racing to your car. The relationship between air resistance, which you want to keep as low as possible, and the required downforce is maximized by this concept.
The difference: This is not a part attached to the rear bumper. Most vehicles have a cavity in the rear end. This space leads to turbulent airflow. With our diffuser, we cover as much of this space as possible and ensure that the airflow remains as laminar as possible. Made of aluminium, the diffuser is lightweight and stable, while remaining affordable.
The assembly is well thought out: for the most part, we use the original screw points. This means you don't have to cut anything on your vehicle! In rare cases, an additional hole is drilled. The connection is made via as many connection points as possible so that we have an even distribution of force across the entire diffuser plate.
Please note: Each of our diffusers has been intentionally developed based on vehicles that already have a coilover suspension with a low setting. This ensures a ground clearance of 8 cm with the diffuser installed. However, we cannot depict every setting: If your vehicle has a different exhaust system or a modified rear bumper, you may need to modify and adapt the diffuser. In this case, the base vehicle had an OEM exhaust system, which typically has a larger muffler than most aftermarket exhaust systems.
