Choose Your Car, Page 32

The kit includes:

Cast Alloy Wheel 7.5x18 ET53 PCD: 5x114.3 Centre Bore: 67.1

Tire: Pirelli Powergy Winter 225/40 R18 92V XL 3PMSF M+S

Hyundai TPMS Valve

Tire Values

Fuel Consumption: Class C

Wet Grip: Class C

Noise Level: Class B - 71 dB

The kit includes:

Cast Alloy Wheel 7.5x18 ET53 PCD: 5x114.3 Centre Bore: 67.1

Tyre: Hankook Winter i*cept evo3 (W330) 225/45 R18 95V XL 3PMSF M+S

Hyundai TPMS Valve

Tire Values

Fuel Consumption: Class C

Wet Grip Performance: Class B

Noise: Class B - 72 dB

For many vehicles, brake cooling is recommended even under moderate loads, including off the race track.
This not only improves braking performance, but can also significantly reduce wear on the friction surfaces.
We direct the airflow to the center of the brake disc to utilize the turbine effect, cooling the disc from the inside at a specific angle to prevent waste and maximize the efficient use of the available air volume.
Thanks to its lightweight construction combined with powder-coated aluminum, the component is both sufficiently strong and lightweight.

The kit allows the OEM channels to be retained because we have developed inlet funnels for the control arm. These simply screw onto the underside of the control arm and feature an opening through the arm with a hose connection, allowing the air supply to be linked to the anchor plate via a short air hose.

The advantages are obvious: a shorter hose can be used to achieve fewer flow losses. This also makes the system more resistant to wear and full steering wheel rotation no longer causes hose damage. The last advantage is easy installation.

Package contents:

1x left anchor plate
1x right anchor plate
1x left inlet funnel
1x right inlet funnel
3x air hose (3 meters)
4x hose clips

* Part intended for motorsport use, without road approval (e.g., ECE).

The kit includes:

Cast Alloy Wheel 7.5x18 ET53 PCD: 5x114.3 Centre Bore: 67.1

Tyre: Pirelli Cinturato Winter 2

Hyundai TPMS Valve

Tyre values

Fuel Consumption: Class C

Wet Grip Performance: Class B

Noise Level: 71 dB (Class 2)

An essential upgrade for any direct injection car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, thereby minimising carbon build-up on the back of the intake valves.

Dimension: 112.4 x 51.8 x 16 mm

RSL 2 mixture:

- circuits, endurance mixture

- medium to high friction coefficient

- long life for pads and discs

- excellent braking effect stability against temperature

*Illustrative photo

DBA 5000 Series T3 brake discs are a high-performance, yet direct replacement for factory brake discs. They are suitable for everyday use, as well as for track days, or where greater braking effect is required. 5000 Series T3 discs are cast from high carbon alloyed steel and then heat stabilised to be resistant to extreme and repeated mechanical and thermal stress. Maximum effective ventilation is provided by the patented Kangaroo Paw cooling system. It is a system of channels where air traces the shape of a kangaroo paw. In addition to increasing the effective heat dissipation area by up to 20%, this provides more consistent support for the active disc surface.

Dimensions: 112.5mm x 51.6mm x 16.5mm

Compound A06:

- Operating temperature 200 to 800 °C
- Friction coefficient 0.30-0.35µ
- Designed for the rear axle of front-wheel drive vehicles
- Lower initial bite to prevent rear axle over-braking
- Same friction coefficient throughout the entire temperature range