HYUNDAI N, Page 11
Product sorting
List of products
Bluestuff Compound:
- Sporty Driving
- Track Days
- Works from Low Temperatures
- Sharper Pads Compared to EBC Yellowstuff
WE’RE NOW OFFERING REPLACEMENT BRAKE CALIPER COVER PLATES FOR THE HYUNDAI I30N, KONA N AND VELOSTER N.
IF YOU OWN ONE OF THESE, YOU’VE PROBABLY SEEN OR HEARD ABOUT THE STANDARD PLATES CRACKING OR EVEN SNAPPING IN HALF. THAT’S BECAUSE THEY’RE CAST FROM FACTORY, WHICH JUST DOESN’T HOLD UP WELL OVER TIME, ESPECIALLY WITH HEAT AND HARD USE.
OUR PLATES ARE DESIGNED TO FIX THAT PROBLEM PROPERLY.
THEY’RE FULLY MADE BY US IN THE UK AND 3D SCANNED TO MAKE SURE THE FITMENT IS SPOT ON. BECAUSE THEY’RE NOT CAST LIKE THE ORIGINALS, THEY’RE MUCH STRONGER AND WON’T SUFFER FROM THE SAME FAILURE ISSUES.
EACH SET COMES AS A PAIR AND IS FINISHED IN A RED POWDER COAT FOR A CLEAN OEM+ LOOK.
FITTING IS SIMPLE. JUST REMOVE THE ORIGINAL PLATE WITH ONE ALLEN KEY BOLT AND INSTALL OURS USING THE SAME MOUNTING POINT. NO MODIFICATIONS NEEDED.
A STRAIGHTFORWARD UPGRADE THAT IMPROVES THE APPEARANCE BEHIND THE WHEELS.
Made from 304 stainless steel, professionally welded and hand-TIG welded in the UK!
Helmholtz
You may be asking what the small tube is on our Resonator Delete? The small tube is a Helmholtz resonator. In an exhaust system, the Helmholtz resonator acts as a gas container (usually air) with an open hole (neck or port) leading into the resonator. The volume of air/gas within and near the open hole vibrates due to the 'elasticity' of the air/gas within. A common example is an empty bottle: the air inside vibrates when you blow across the top!
What is Drone?
Drone is the point at which exhaust sound resonates in the cabin, creating a noise most drivers dislike. Decibels and frequencies may vary slightly depending on the driver and car. This is why we created Anti Drone Resonator Deletes. When removing a standard resonator, you are paying the difference between someone who wants to give you a pipe and throw it on the car, and a company that designed a product for a specific job, who took the time to research, develop and test to make the product the best it can be!
RPM PERFORMANCE Anti Drone Resonator Deletes are designed to reduce resonance throughout the rev range, specifically at motorway speeds on UK roads (70 mph). This is because if you are driving for a short journey, a bit of sporty noise isn't bad for most drivers, but if you are driving for extended periods, you don't want the vehicle to resonate in the cabin.
Front brake pad set.
Hyundai i30N
*Illustrative photo
Dimension: 141 x 61 mm
HP Plus Compound:
- Track days, hill climbs
- Suitable for Normal Operation
- Also suitable for the rear axle of front-wheel drive cars (rally, sprint circuit)
- Works From 37°C
- Optimal operating temperature 150-315°C
- Max. temperature 425°C
Bluestuff Compound:
- Sporty Driving
- Track Days
- Works from Low Temperatures
- Sharper Pads Compared to EBC Yellowstuff
Introducing our NEWLY MANUFACTURED Hyundai I30N / VN / Kona N Flexi pipes, made from stainless steel, professionally TIG welded and hand-made in Great Britain!
Why Change Your Flexi?
The standard OEM flexi is considered the most restrictive part of the exhaust system on the I30N, as the bore diameter narrows to approximately 50mm. The RPM PERFORMANCE Hyundai I30N Flexi is a true 76mm (3”), so you will see an increase of 8 to 12 horsepower compared to the standard flexi pipe. This product will pair nicely with a GPF removal and make for a high-flow exhaust system.
What will it sound like?
Turbocharged engines need to be able to breathe. By removing the stock flexi pipe for the RPM Performance flexi, you effectively increase flow, so you will see a slight increase in power and a noticeable increase in exhaust sound, especially on engine overrun.
Will the Engine Management Light (EML) illuminate?
No.
Fitment
Our Flexi pipes are a direct bolt-on replacement requiring no cutting or welding. All are supplied ready to fit with the correct bolts.
Introducing our NEWLY MANUFACTURED Hyundai I30N / VN / Kona N Flexi pipes, made from stainless steel, professionally TIG welded and hand-made in Great Britain!
Why Change Your Flexi?
The standard OEM flexi is considered the most restrictive part of the exhaust system on the I30N, as the bore diameter narrows to approximately 50mm. The RPM PERFORMANCE Hyundai I30N Flexi is a true 76mm (3”), so you will see an increase of 8 to 12 horsepower compared to the standard flexi pipe. This product will pair nicely with a GPF removal and make for a high-flow exhaust system.
What will it sound like?
Turbocharged engines need to be able to breathe. By removing the stock flexi pipe for the RPM Performance flexi, you effectively increase flow, so you will see a slight increase in power and a noticeable increase in exhaust sound, especially on engine overrun.
Will the Engine Management Light (EML) illuminate?
No.
Fitment
Our Flexi pipes are a direct bolt-on replacement requiring no cutting or welding. All are supplied ready to fit with the correct bolts.
Introducing our NEWLY MANUFACTURED Hyundai I30N / VN / Kona N Flexi pipes, made from stainless steel, professionally TIG welded and hand-made in Great Britain!
Why Change Your Flexi?
The standard OEM flexi is considered the most restrictive part of the exhaust system on the I30N, as the bore diameter narrows to approximately 50mm. The RPM PERFORMANCE Hyundai I30N Flexi is a true 76mm (3”), so you will see an increase of 8 to 12 horsepower compared to the standard flexi pipe. This product will pair nicely with a GPF removal and make for a high-flow exhaust system.
What will it sound like?
Turbocharged engines need to be able to breathe. By removing the stock flexi pipe for the RPM Performance flexi, you effectively increase flow, so you will see a slight increase in power and a noticeable increase in exhaust sound, especially on engine overrun.
Will the Engine Management Light (EML) illuminate?
No.
Fitment
Our Flexi pipes are a direct bolt-on replacement requiring no cutting or welding. All are supplied ready to fit with the correct bolts.
RPM PERFORMANCE Hyundai I30N GPF Delete:
Here at RPM Performance, we successfully manufacture Hyundai I30N GPF Deletes. It is unlike typical GPF Deletes on the market.
Made from 304 grade stainless steel, professionally TIG welded and hand-crafted in the United Kingdom!
Check out our video to hear what it sounds like. The video is located below the description.
What is a GPF?
Gasoline Particulate Filters (GPF) are an emissions after-treatment technology based on Diesel Particulate Filters (DPF), developed to control particulate emissions from Gasoline Direct Injection (GDI) engines.
It is also the most restrictive part of the exhaust system. Our GPF Delete increases gas flow for maximum output.
What will it sound like?
Turbocharged engines need to be able to breathe. By removing the stock GPF for the RPM PERFORMANCE GPF Delete, you effectively increase flow, so you should notice a slight increase in power and a significant increase in sound, especially during overrun.
Will the Engine Management Light (EML) illuminate?
No.
Unlike many others, we have fitted an internal component to control/switch the EML, which prevents it from illuminating.
Suitable for: Hyundai I30 N Hatchback 2017 -
Surface developed and optimised for sports use on the road and on the Nordschleife.
Front brake pads set for i30N including facelift and KONA N
Set for the front axle (4 pads)
With N badging
Optimised performance brake pads for sports use on the road and occasional track days
With bonded NVH shim to reduce occasional squealing noises
With StVO approval according to ECE R9 test
