PŘEDNÍ NÁPRAVA
Product sorting
List of products
Prachovka předního brdiče HYUNDAI i30N (Originál)
Brake Caliper Piston Seal No.2 HYUNDAI i30N (Genuine)
Brake Caliper Piston Seal No. 1 HYUNDAI i30N (Original)
FRONT BRAKE CALIPER GUIDE PIN "A" HYUNDAI i30N
FRONT BRAKE CALIPER PIN "B" HYUNDAI i30N (Genuine)
Front Brake Caliper Piston HYUNDAI i30N (Genuine)
DBA Xtreme Performance brake pad set with ECE R90 approval for the front axle of the Hyundai i30N PD. The Performance Package is a direct replacement for factory brake pads, ideal for sports use in combination with T3 series 4000 and 5000 discs.
HPS Compound:
- Sporty Driving
- Suitable for normal road use
- Also suitable for the rear axle of front-wheel drive cars (rally, sprint circuit)
- Works From 37°C
- Optimal operating temperature 37 - 260°C
- Maximum temperature 370°C
*Illustrative photo
Front Brake Pads Hawk Performance Ceramic
*Illustrative photo
Dimension: 141 x 61 mm
Performance Ceramic Compound:
- street compound
- extremely quiet compound
- very low dust
- rotor-friendly
- stable friction performance
- Works From 37°C
- Optimal operating temperature 37–230°C
- Max. temperature 340°C
Yellowstuff compound:
- Sporty Driving
- Track Days
- Works from Low Temperatures
- OEM pad replacement
Dimension: 141 x 61 mm
HPS 5.0 Blend:
- Sporty Driving
- Suitable for normal road use
- Works From 37°C
- Opt. Operating Temperature 37-290°C
- Max. Temperature 400°C
*Illustrative photo
WE’RE NOW OFFERING REPLACEMENT BRAKE CALIPER COVER PLATES FOR THE HYUNDAI I30N, KONA N AND VELOSTER N.
IF YOU OWN ONE OF THESE, YOU’VE PROBABLY SEEN OR HEARD ABOUT THE STANDARD PLATES CRACKING OR EVEN SNAPPING IN HALF. THAT’S BECAUSE THEY’RE CAST FROM FACTORY, WHICH JUST DOESN’T HOLD UP WELL OVER TIME, ESPECIALLY WITH HEAT AND HARD USE.
OUR PLATES ARE DESIGNED TO FIX THAT PROBLEM PROPERLY.
THEY’RE FULLY MADE BY US IN THE UK AND 3D SCANNED TO MAKE SURE THE FITMENT IS SPOT ON. BECAUSE THEY’RE NOT CAST LIKE THE ORIGINALS, THEY’RE MUCH STRONGER AND WON’T SUFFER FROM THE SAME FAILURE ISSUES.
EACH SET COMES AS A PAIR AND IS FINISHED IN A RED POWDER COAT FOR A CLEAN OEM+ LOOK.
FITTING IS SIMPLE. JUST REMOVE THE ORIGINAL PLATE WITH ONE ALLEN KEY BOLT AND INSTALL OURS USING THE SAME MOUNTING POINT. NO MODIFICATIONS NEEDED.
A STRAIGHTFORWARD UPGRADE THAT IMPROVES THE APPEARANCE BEHIND THE WHEELS.
Front brake pad set.
Hyundai i30N
*Illustrative photo
Dimension: 141 x 61 mm
HP Plus Compound:
- Track days, hill climbs
- Suitable for Normal Operation
- Also suitable for the rear axle of front-wheel drive cars (rally, sprint circuit)
- Works From 37°C
- Optimal operating temperature 150-315°C
- Max. temperature 425°C
Bluestuff Compound:
- Sporty Driving
- Track Days
- Works from Low Temperatures
- Sharper Pads Compared to EBC Yellowstuff
Front brake pads Ferodo DS2500 for:
Hyundai i30N (PD) 2.0 Turbo 2017+
Dimensions: 140.7 x 61 x 20.1 mm
*Illustrative photo
DS2500 Compound:
- Sport Driving, Hill Climb Racing
- For Road Use
- Works from Low Temperatures
- Avg. friction coefficient 0.42
- Working temperature 20-500°C
Front brake pads PAGID Racing STREET+ Compound for:
Hyundai i30N (PD) 2.0 Turbo 2017+
Dimension: 140.7 x 61.3 x 19.7 mm
*Illustrative photo
STREET+ Brake Pad Compound
- Sport Driving, Hill Climb Racing
- For Road Use
- Works from Low Temperatures
- Avg. Friction Coefficient 0.47
- Operating Temperature 20-600°C
For many vehicles, brake cooling is recommended even under moderate loads, including off the race track.
This not only improves braking performance, but can also significantly reduce wear on the friction surfaces.
We direct the airflow to the center of the brake disc to utilize the turbine effect, cooling the disc from the inside at a specific angle to prevent waste and maximize the efficient use of the available air volume.
Thanks to its lightweight construction combined with powder-coated aluminum, the component is both sufficiently strong and lightweight.
* Part intended for motorsport use, without road approval (e.g., ECE).
Surface developed and optimised for sports use on the road and on the Nordschleife.
Front brake pads set for i30N including facelift and KONA N
Set for the front axle (4 pads)
With N badging
Optimised performance brake pads for sports use on the road and occasional track days
With bonded NVH shim to reduce occasional squealing noises
With StVO approval according to ECE R9 test