PDEN FL Hatchback (2021+), Page 13
Product sorting
List of products
Genuine half-shaft for i30N Hyundai 2021-2025 (Facelift)
Gearbox: manual
Side: Right
!!! Always provide VIN with your order !!!
- Photo illustrative -
Dimensions: 8x19 ET55
Bolt Pattern: 5x114.3
Center Bore: 67.1
Weight: 9.7 kg
Can be cleaned and reused
30 to 40% higher airflow
Significant change in intake noise
High durability
Parts certificate included (for use on public roads, the parts certificate must be registered in the vehicle documents)
Incl. very detailed installation instructions
No warranty restrictions, as the N logo intake kit is an original Hyundai accessory (applies only to Germany. In other countries, please contact Hyundai).
Caution: Registration is possible in combination with ECE-approved parts. However, as such registration is at the inspector's discretion, please clarify this with the inspector beforehand.
Caution!: Cannot be used in conjunction with auxiliary heaters.
Motorsport aerodynamics for your Hyundai I30n!
With our SPEED diffuser, you will not only visually stand out from the crowd, but also bring technology from professional racing to your car. The relationship between air resistance, which you want to keep as low as possible, and the required downforce is maximized by this concept.
The difference: This is not a part attached to the rear bumper. Most vehicles have a cavity in the rear end. This space leads to turbulent airflow. With our diffuser, we cover as much of this space as possible and ensure that the airflow remains as laminar as possible. Made of aluminium, the diffuser is lightweight and stable, while remaining affordable.
The assembly is well thought out: for the most part, we use the original screw points. This means you don't have to cut anything on your vehicle! In rare cases, an additional hole is drilled. The connection is made via as many connection points as possible so that we have an even distribution of force across the entire diffuser plate.
Please note: Each of our diffusers has been intentionally developed based on vehicles that already have a coilover suspension with a low setting. This ensures a ground clearance of 8 cm with the diffuser installed. However, we cannot depict every setting: If your vehicle has a different exhaust system or a modified rear bumper, you may need to modify and adapt the diffuser. In this case, the base vehicle had an OEM exhaust system, which typically has a larger muffler than most aftermarket exhaust systems.
Carbon Wings for i30N Facelift
PERFORMANCE PROFILE
• ACEA C2
• PSA B71-2312
Suitable for applications:
• API SN
• Chrysler MS-90047, Chrysler MS-13340
• FIAT 9.55535-GS1, FIAT 9.55535-DS1
• Peugeot, Citroën, DS
• Suitable for engines of many Asian manufacturers requiring 0W20 viscosity oil
including Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Suzuki, and Toyota.
• BMW Longlife-12 FE
The Forge Motorsport FMINT25 intercooler for the Hyundai i30N Mk3.5 Facelift was designed, manufactured, and tested directly at Forge Motorsport's headquarters in Gloucester to enhance the vehicle's performance and cooling efficiency while maximizing the space of the factory intercooler.
Carbon fibre front fenders for i30N
Hyundai I30N 200-Cell Sports Cat Downpipe:
Introducing our Hyundai I30N 200-Cell Sports Cat downpipe, manufactured from stainless steel, professionally TIG welded and hand-made in the UK!
No EML / CEL
Designed and manufactured in-house
T304L Stainless Steel Construction
76mm outlet
Brushed and linished pipework
OEM-style fitment so you can easily revert back
See the sound video below.
Why change your downpipe?
To get the most out of your turbocharged engine, you need to change the downpipes. By replacing the manifold with our Sports Cat downpipe, you allow the turbo to breathe better as you have dramatically improved the flow of the system. This effectively increases the vehicle's torque and power.
Why RPM Performance downpipes?
In our sports CAT downpipes, we use an extremely high-quality 200-cell catalytic converter, providing you with the benefits of performance and road legality. We have also designed the downpipe to allow refitting the standard heat shield. Our downpipes are made entirely from T304 stainless steel and do not disrupt flow. Fully TIG welded to ensure they last!
These are made to order, approximately 2-3 weeks from order.
GiroDisc front slotted rotors brake discs (left + right) for:
Hyundai i30N (PD) Performance Package
size: 360 x 30 mm
quantity: 2 pcs (left + right)
axle: front
In visible carbon
Lacquered and polished
Replacement front brake discs only for Forge Motorsport brake kits. Disc dimensions: 380 x 32 mm
-
Roll cage with seat belt for i30N.
Attention: Not for vehicles with a panoramic roof!
The installation of roll cages does not require any drilling into the body. The entire cage is anchored to existing structural mounting points in the vehicle's body (e.g. seat mounts, IsoFix, etc.). This allows for easy installation and the possibility to revert the car to its original state at any time. The cage fulfils its function 100% and significantly increases the body's torsional rigidity.
----------Due to the item's size, additional shipping costs will apply.--------------
Club sports bar as a plug-and-play version
It adapts with great care and precision to the vehicle's contour
100% Made in Germany
Certified materials
Attaches to the original mounting points on the vehicle – no drilling or welding required.
Integrated straps for attaching the shoulder harnesses
Heigo® Clevis Head Attachment: The advantage of this attachment is that our proven Clevis Head® system is used on all tube ends. The length of the struts can be continuously adjusted using this screw system, and the length adjustment increases the rigidity of the cage/roll bar.
The harness bar is positioned slightly back in the main bar and runs horizontally behind the front seats from left to right.
Shoulder straps for 4/6-point harnesses can be attached to this bar. The height of the harness bar creates a better angle for the shoulder straps than if they were attached to the rear seat. This puts less strain on the spine in the event of an accident.
Color
The product is supplied in black as standard. If you have a color request, please let us know.
GiroDisc front two-piece grooved brake discs (left + right) for:
Hyundai i30N (PD) Performance Package
size: 360 x 30 mm
quantity: 2 pcs (left + right)
axle: front
The carbon fibre rear spoiler significantly increases performance: At a speed of 140 km/h, a single rear spoiler weighing 1550 grams increases rear downforce by 21 kilograms, and at 240 km/h by as much as 61 kilograms
So, you've decided to radically save on weight? Very good, because you save weight exactly in the right place. Place the battery in the boot and replace the extremely heavy OEM bonnet with ours, and your I30N will drive completely differently. Your tyres will thank you on the front axle with great grip and minimal wear. This bonnet is made of 100% carbon, matches the OEM bonnet, and weighs only 5 kg! In this case, the original Hyundai I30N bonnet was pressed from the inside and outside, thus retaining its original shape and geometry. This features a visible carbon weave with a minimal number of well-placed seams.
