i20N, Page 4
Product sorting
List of products
This brace from RPM Performance significantly reduces wheel hop and greatly improves handling. By connecting both inner wishbone bolts, the brace prevents the wishbone arms from being pulled together.
Adding the brace effectively strengthens the subframe. During sharp turns and acceleration, the transverse arms tend to bend at the mounting bolts. This lateral force is transferred to the subframe, and the brace helps prevent this bending.
Installation is simple: simply remove the two bolts and attach the brace to the subframe.
Importantly, this brace does not make driving your vehicle more difficult.
Thanks to this “plug and play” external unit with remote control, you take control from the car's control unit and finally become the master of the valves in your exhaust system. It doesn't matter whether you have a stock exhaust system, a REMUS system, or another performance system. The exhaust valves are always controlled as standard via the on-board computer according to the set mode. The fundamental problem is that even if you set the highest sport mode via the on-board computer, it doesn't automatically mean that the valves will "listen" to you and open to 100%. It depends on the specific vehicle model (their control algorithm always differs), but it almost always applies that full opening only occurs with a warm engine, under load, and from certain RPMs! In other words, you only get the best sound from the exhaust in a narrow spectrum of car use. And that's a shame. Likewise, even in the lowest car mode, there is often a desire or need to enjoy the sound to the fullest. Only with our external unit can you fully open the valves in the exhaust at any time, or completely close them if necessary, or switch back to serial mode, and the fourth option is to open the valves to 50%. Installation is absolutely simple and can be done by any service centre, or a skilled owner can handle it at home even without tools. For most vehicles, this involves simply 'bridging' the wiring leading to the electric motor(s) that control the exhaust valves. For other vehicles, the principle of bridging the electrical circuit is implemented in a box under the dashboard, again in a 'plug and play' manner. The driver then controls the valves using a wireless controller in 4 modes, as described above. The controller is already paired with the control unit and no calibration or further settings are required. Everything is simply 'plug and play'. Given the absolutely essential benefit of improved sound (extracting the maximum from the exhaust system), purchasing this external control is simply an automatic investment.
The front floor mats are illuminated and activate when the doors are opened - set of 4.
Black velour rear floor mats
Easy installation, as the floor mats are illuminated using button cell batteries
Surface developed and optimised for sports use on the road and on the Nordschleife.
Front brake pads set for i30N including facelift and KONA N
Set for the front axle (4 pads)
With N badging
Optimised performance brake pads for sports use on the road and occasional track days
With bonded NVH shim to reduce occasional squealing noises
With StVO approval according to ECE R9 test
Front brake pads Ferodo DS2500 for:
Hyundai i20 N 1.6 Turbo 2021+
Dimension: 137.9 x 61.6 mm
*Illustrative photo
Size: 7.5x18 ET53
Bolt Pattern: 5x114.3
Center Bore: 67.1
Weight: 9,5 kg
Size: 7.5x18 ET53
Bolt Pattern: 5x114.3
Center Bore: 67.1
Weight: 9,5 kg
Size: 7.5x18 ET53
Bolt Pattern: 5x114.3
Center Bore: 67.1
Weight: 9,5 kg
DBA 4000 T3 Front Brake Disc for:
Hyundai i20 N 1.6 Turbo 2021+
Diameter: 320 mm
Thickness: 28 mm
Quantity: 1 piece
4000 T3:
- Slotted
- Normal and Sport Driving, Track Days, Motorsport
- XG-150 High Carbon Alloy
- Kangaroo Paw™ Cooling and Thermo-Marking for Temperature Control
Made of aluminium
For front axle installation
Improves vehicle cornering ability
4x TPMS valve
4x metal nut
Colour: Black
With printed N logo
Lowering at the front: approx. 22 mm
Lowering at the rear: approx. 15 mm
Rozměr: 8x18 ET45
Rozteč: 5x114.3
Střed: 72.6
Váha: 7,8kg
ABE schválení: ANO
Size: 8x18 ET48
Bolt Pattern: 5x114.3
Centre: 72.6
Weight: 8.1kg
TÜV Approval: YES
PERFORMANCE PROFILE
• API SP, SP RC, SN PLUS RC
• SN PLUS, SN RC, SN
• Chrysler MS-6395
• Fiat 9.55535-CR1
• Ford WSS-M2C962-A1, Ford WSS-M2C947-B1
• Ford WSS-M2C947-A
• GM dexos 1 Gen 2, GM dexos 1 Gen 1
• GM 6094M, GM 4718M ILSAC GF-6A
• ILSAC GF-5, ILSAC GF-4
• Suitable for engines of many Asian manufacturers requiring 0W20 viscosity oil
including Daihatsu, Honda, Hyundai, Infiniti, Kia, Lexus, Mazda, Mitsubishi, Nissan,
Subaru, Suzuki, and Toyota.
